Collection:
Workshop
982 products
Zeta Lowdown Inner Kit Front KYB AOS25 -30mm
This is the perfect part for riders who want to lower their vehicle for better footing or when building a motored vehicle. By replacing the inner parts of the front forks, the suspension can be low...
DRC FORK COMPRESSION VALVE REMOVAL TOOL FOR WP 4CS
The DRC Fork Compression Valve Removal Tool is a specialised workshop tool designed for the safe and efficient removal of compression valves from KYB and SHOWA twin-chamber fork cartridges. Enginee...
DRC Gyro Stand 2
A folding stand that makes it easy to adjust wheel runout, balance, and check bearings all with one unit. It is useful not only for the maintenance of laced wheels, but also for restoring old bikes...
DRC GAS CAP EXTRACTOR
Special tool for removing rear suspension gas cap. Does not damage gas cap valve thread.
DRC WIRE OILER TI-COLOUR
Used to inject lubricant into the cable housing.
Features:
Available in 3 hard anodised colours.
Body and bolt are made of high-grade aluminium.
DRC ALUMINUM MINI CHAIN CUTTER BLUE
SPECIFICATIONS:- Very compact chain cutter for 420 to 520 size chains.- Compact design for easy storage.- Chain cutter body is made of lightweight aluminum.- Cutting pin is made of durable chromoly...
DRC T2 Cambuckle Tie Down - Blue
Standard cambuckle tiedown.
Features:
Vinyl-coated hooks with a 25 mm wide, thick and durable strap.
Comes in pairs.
Comes with loop strap to prevent damaging your bike.
Safety hook included...
DRC BLEED CUP FOR REAR SHOCK FOR SHOWA-1
Make rear shock air bleeding quick and hassle-free with the DRC Bleed Cup. Designed for use with rear suspension systems equipped with a bleeding bolt hole, this handy tool helps capture excess oil...
DRC REAR SHOCK SEAL HEAD INSERT KIT FOR WP
Seal guide for Rear suspension seal head. Does not damage the oil seal during installing the suspension seal.
Available for KYB/SHOWA and WP rear suspension.
DRC Moto Binding - Black/ Red
Innovative tyre chock.
Features:
May be used for pit bikes to full-size dirt bikes (accepts 8" to 21" wheels).
Maximum tyre width: 130mm.
Folding design saves space (height is 135mm when fold...
Sold Out
DRC Hybrid Ramp Straight 150cm - Black
Lightweight hybrid ramp from DRC.
Specifications:
Aluminium alloy and nylon tube/plate construction.
20cm wide (8").
150cm long.
Tongue for attaching to the vehicle/trailer bed.
Nylon suppo...
Sold Out
DRC Tyre Iron 400mm
Standard tyre lever.
Features:
Long 400mm length for easy operation for hard tyre removal.
Made of durable heat-treated steel.
DRC AIRVALVE CORE DRIVER RED
Valve core remover designed for quick operation.
Features:
Remover tip is made of chrome molybdenum steel.
Aluminium knurled grip.
Length: 45mm
Zeta Side Stand Extender Black/Silver Honda CRF1000L/ADV '16-
Kick stand extension plate provides more stability on uneven surfaces and soft ground.
Features:
The plate has press-fit nuts to provide more grip/traction, even on slippery surfaces.
Availabl...
Sold Out
Zeta Rear Shock End Cap KYB 50mm - Blue
Replacement end cap for damaged OEM cap
Features:
Easy removal when disassembling with the groove.
4 grooves can be tapped and easily removed.
Made of 7000 series aluminium and anodized finis...
DRC SPRING COMPRESSOR FOR TWIN-SHOCK
Spring removal tool for twin shock motorbikes. 2 spring hooks hold the springs securely while compressing the springs, making it easy to remove the springs from the shock bodies.
DRC BEAD HOLDER
Keeps the tyre bead down during the tyre change. Hooks over the spoke and pushes down on the bead for easy tyre installation.
Durable rubber grip for easy operation.
DRC PRO SPOON TYRE IRON WITH WRENCH 17MM
The DRC Pro Spoon Tyre Iron with 17mm Wrench combines two essential trail-side tools into one compact design. Featuring a tyre spoon on one end and a 17mm axle wrench on the other, it makes wheel a...
Zeta Swing Arm Spool M6 Yamaha - Ti-Colour
CNC-machined aluminium swingarm spool. Can be used with most street racing stands available on the market. Comes in pairs.
DRC CHAIN CHECKER 420-530
The DRC Chain Checker 420-530 is a compact tool designed to accurately measure motorcycle drive chain wear and chain slack. It quickly checks the chain's extension ratio to determine when replaceme...
ENZO-DRC TOOL BASE SHOCKHICOMP ADJUSTER 14" SHOWA BLACK
SPECIFICATIONS:- ENZO DRC co-developed product.- Click feeling allows easy adjustment of rear suspension high compression.- Available for 14 mm and 17 mm adjuster sizes.
ENZO-DRC TOOL BASE VALVE JIG SHOWA AOS RED
Co-developed with Enzo Racing, this premium tool is designed to simplify the removal and installation of front fork compression valve caps during suspension servicing. Specifically engineered for S...
DRC PRO FORK CAP WRENCH WP 35MM ORANGE
Aluminium front fork top cap wrench. Allows to disassemble and assemble in one cycle job with a wrench and rod stopper combined tool.
Features:
Closed design wrench grabs the top cap tightly.
...
DRC T2 Cambuckle Tie Down - Black
Standard cambuckle tiedown.
Features:
Vinyl-coated hooks with a 25 mm wide, thick and durable strap.
Comes in pairs.
Comes with loop strap to prevent damaging your bike.
Safety hook included...
DRC BLEED CUP FOR REAR SHOCK FOR WP
Make rear shock air bleeding quick and hassle-free with the DRC Bleed Cup. Designed for use with rear suspension systems equipped with a bleeding bolt hole, this handy tool helps capture excess oil...
Sold Out
Zeta Side Stand Extender Black/Silver Suzuki DR-Z400S/SM '00-
Kick stand extension plate provides more stability on uneven surfaces and soft ground.
Features:
The plate has press-fit nuts to provide more grip/traction, even on slippery surfaces.
Availabl...
DRC Hybrid Folding Ramp 210cm
The DRC Hybrid Folding Ramp is designed to make loading motorcycles and other powersports equipment safe and convenient. Combining lightweight aluminium alloy construction with durable nylon suppor...
ENZO-DRC TOOL BASE SHOCKHICOMP ADJUSTER 17"KYB/WP BLUE
SPECIFICATIONS:- ENZO DRC co-developed product.- Click feeling allows easy adjustment of rear suspension high compression.- Available for 14 mm and 17 mm adjuster sizes.
DRC PRO SPOON TYRE IRON WITH WRENCH 27MM
The DRC Pro Spoon Tyre Iron with 27mm Wrench combines two essential trail-side tools into one compact design. Featuring a tyre spoon on one end and a 17mm axle wrench on the other, it makes wheel a...
DRC HC2 Lift Stand Twin-arm with Damper - Black / Red
Designed for easy maintenance and servicing, this height-adjustable motorcycle stand provides a stable and secure platform for lifting most dirt bikes. The durable steel construction, long-lever fo...
Zeta Rearshock Preload Adjuster WP50B - Black
REARSHOCK PRELOAD ADJUSTER EXCHANGE
Quick preload adjustment by turning, not tapping!
Simply by replacing the stock locknut and spring seat, the difficult preload adjustment is made easier. Inste...
Sold Out
UNIT Engine Stand Type A - Black
Engine maintenance stand.
Features:
Can be used on 50 to 450cc single-cylinder engine.
Stand length and height are adjustable, fits most single-cylinder engines.
Comes with 2 engine shafts.
...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device