Tools

614 products

$94.99

The WMP Chain Breaker Tool is designed for breaking 420-530 size chains. The folding handle allows for quick operation and easy storage, while the heat-treated drive pin provides additional strengt...

$10.99

Motion Pro is dedicated to producing the most versatile, unique and durable products for professional and home use. Motion Pro tools are designed to be simple to use, yet durable enough to withstan...

Oxford Airtrack Workshop Steel Floor Pump

$61.90

The Oxford Airtrack pump is a steel floorpump. Features: Twin head fits Presta and Schrader valves. 160PSI Max Pressure. Super tough steel barrel. Includes adaptors for ball and inflatables. Ergon...

Oxford Silicone Rubber Funnel 10.5cm Diametre

$19.90

Oxford’s huge range of products encompasses everything that makes life on bikes better: from jackets, pants and boots to accessories, hard parts, locks, luggage and much more! Their market-leading ...

Motion Pro Chain Press Plate Tool for Jumbo Chainbreaker

$41.99

Motion Pro Flywheel Puller 28mm x 1.0mm Right-hand Int. KTM/Husq

$99.99

Flywheel Puller M28 X 1.0 RH Internal Thread with Protectors. Features: Used for removal of the flywheel or rotor if applicable. Premium quality high carbon steel. Heat treated for strength and du...

$159.99

Fits 41mm fork legs. Innovative design makes tools easier and safer to use than old-fashioned pin aligned drivers. Features: Anodized aluminium locking ring features knurled finish for a secure no...

$69.99

Compact design Scale for easy reference Designed to work with all belt drive models with a 10 lb. specification

Sold Out

WHITES 4 IN 1 HEX AXLE TOOL ALU RED -17/19/22/24mm

$27.99

The WMP 4-in-1 Hex Axle Tool is compatible with most late-model sport and off-road motorcycles. The tool includes 17mm, 19mm, 22mm and 24mm sizes for quick and easy removal or installation of the a...

$48.99

The WMP Showa BPF Fork Cap Removal Tool is designed to remove and install 8-point 45mm fork caps found on 43mm Showa Big Piston Forks. Constructed from lightweight aluminium, the tool helps prevent...

Sold Out

$99.99

The WMP Damper Rod Fork Tool is designed for assembling and disassembling most 41mm, 43mm, 46mm and 47mm Kayaba and Showa inverted forks. The dual-sided design features one side for Kayaba forks an...

Whites Flywheel Puller 28mm x 1.0 R/H Thread (Male)

$46.99

Used in many different jobs, the flywheel puller is an essential engine service tool. WMP has a huge selection of flywheel pullers for most motorcycles and ATVs, making WMP products your one-stop f...

$359.99

The WMP Wheel Bearing Tool for Harley-Davidson is the ideal tool for removing and installing sealed-type wheel bearings without damaging the wheel. It can be used on 3/4-inch and 1-inch ID bearings...

$23.99

The WMP Fluid Hose Clamp is designed to completely or partially close flexible brake, fuel and vacuum fluid lines. It allows servicing to be carried out without draining the system and features an ...

$48.99

The WMP Shock Spanner Punch Tool is designed with an extra-long shaft to help turn hard-to-reach lock rings and preload rings on rear shocks. The angled brass tip provides a secure bite while prote...

Whites Flywheel Puller - KTM 4-Stroke (26mm x 1.0 RH Internal Thread)

$52.99

The WMP Flywheel Puller is an essential engine service tool designed for removing flywheels or rotors where applicable. Constructed from heat-treated carbon steel, it provides the strength and dura...

WHITES OIL PERCENTAGE / MEASURE JUG W/RUBBER CAP 500ML

$29.99

Capable of holding up to 680ml of fluid and with 4 different percentage markings, along with a general millilitre marking for gearbox/engine oil changes. The WMP Oil mixture jug has all your two-st...

$52.99

The WMP Fork Oil Level Tool is the perfect tool for checking and adjusting the internal fork oil volume on all conventional and single-chamber cartridge forks. The aluminium measuring tube features...

Sold Out

WHITES CARB NOZZLE CLEANING TOOL SET (20pcs 0.45-1.5mm)

$37.99

The WMP Carburettor Nozzle Cleaning Tool Set features 20 precisely sized stainless steel tips designed for cleaning carburettor jets. Tip sizes range from 0.45mm to 1.50mm in 0.05mm increments, pro...

WHITES OIL FILTER WRENCH CUP TYPE 64mm/14 Flute

$24.99

The WMP Oil Filter Wrench Cup features a precision-stamped deep-reach cap style that is engineered for a perfect fit. Constructed with 14 flutes and a 64mm diameter, along with a 3/8 square socket ...

$54.99

The WMP BPF Fork Seal Head Tool holds fork cartridges during disassembly, assembly and removal of the cartridge seal head from the tube. The tool enables you to change fork springs without valve di...

Terminal Remover Pin Puller Extractor Tool - 11 pcs

$28.99

Designed to remove vehicle wire terminals without damage. These lightweight, portable, Terminal Removal / Pin Puller Extractor Tools helps you do the work quickly and easily Specifications: Number...

$39.99

A range of quality tools for bleeding & lubrication maintenance. Makes bleeding your brakes a one-person job Instructions included Made in the U.S.A. Will not bleed air from a dry system

Sold Out

$159.99

Fits 48mm fork legs. Innovative design makes tools easier and safer to use than old-fashioned pin aligned drivers. Features: Anodized aluminium locking ring features knurled finish for a secure no...

$53.99

Sold Out

Motion Pro Dual Chamber Yamaha Fork Cap Wrench 49mm 8 pt Hex

$65.99

This is a 49 mm, 8-point box wrench for removing the fork cap (cartridge) on dual chamber closed cartridge forks on late-model Yamahas and Hondas. Features: 12mm slot for holding the damper rod fo...

Sold Out

Motion Pro Adaptors Brass 5mm Honda-Suzuki Set 4

$23.99

Replacement carb adapter set for use with mercury carb synchronization tools. Includes 2 long 5mm tubes and 2 short 5mm tubes See MP080040 for 6mm carb adaptor set

Sold Out

$159.99

Fits 43mm fork legs. Innovative design makes tools easier and safer to use than old-fashioned pin aligned drivers. Features: Anodized aluminium locking ring features knurled finish for a secure no...

Sold Out

Motion Pro Flywheel Puller 22mm x 1.5 R.H. Thread

$35.99

Flywheel Puller, 22mm X 1.5 Right-hand throttle Used for removal of the flywheel or rotor if applicable Premium quality high carbon steel Heat treated for strength and durability Durable hot black...

$21.99

WHITES COMBO LEVER - TYRE LEVER + 32MM SPANNER

$41.99

WMP Combo Tyre Levers are the perfect addition to your trackside toolbox, enabling quick and easy tyre changing. A 32mm spanner end is used to loosen the axle nut for removal of the wheel, while th...

Sold Out

$50.99

The WMP Carburettor Float Level Gauge is designed to accurately measure the height between the float and carburettor gasket surface. With an adjustable width of 16-78mm and measurement capability u...