Tools

610 products

$9.99

The WMP Valve Adjustment Tool is the perfect tool for adjusting your valves on many Honda, Suzuki, Moto Guzzi and Yamaha models. Constructed with square holes on both sides with edge lengths of 3mm...

Sold Out

$148.99

The WMP Cam Gear Removal and Installation Tool is essential for removing and replacing cam gears when rebuilding Triumph twin engines. With limited space behind the gears for a universal puller, th...

Sold Out

Whites Flywheel Puller 27mm x 1.25 R/H Thread (Male)

$32.99

Used in many different jobs, the flywheel puller is an essential engine service tool. WMP has a huge selection of flywheel pullers for most motorcycles and ATVs, making WMP products your one-stop f...

Sold Out

Whites Flywheel Puller 38mm X 1.5 Right-hand I.T Can-Am DS650 '00-'07

$62.99

$192.99

The WMP Piston and Ring Compressor Set includes six bands and pliers. Use the pliers with any band to install pistons from 2-7/8 to 4-3/8 in diameter (73mm to 111mm). The self-locking ratchet allow...

Sold Out

$65.99

The WMP Fork Bleeding Tool Set easily threads onto the damping rod to facilitate cartridge fork bleeding while preventing the typical mess when changing fork oil. Including four adaptors for dampin...

$30.90 Off

$72.09

~~$102.99~~

The WMP Valve Stem Seal Install Tool Set provides three common sizes (4.0mm, 4.5mm and 5.0mm) for use on most modern street bikes, plus one additional 5.0mm tool specially designed for Suzuki Hayab...

$62.99

The WMP Carburettor Adjustment Tool combines an 8mm hex nut and flathead screwdriver in one convenient tool. This design allows you to unlock the locknut, adjust the balancing screw and re-lock the...

Sold Out

WHITES STEERING STEM NUT TOOL Honda CB CBX CBR GL VFR VT etc

$85.99

The WMP Steering Stem Nut Tool is a must-have for accurately adjusting head bearings to the manufacturer's specified settings. Loose bearings can increase head shake, while over-tightened bearings ...

Sold Out

Whites Flywheel Puller Yamaha 30mm x 1.0 Right-hand Internal Thread

$49.99

$4.80 Off

$11.19

~~$15.99~~

The WMP Jet Wrench is a two-piece tool set with three different applications. A double-sided 6mm and 8mm wrench for round jets is included, along with a 6mm wrench for hex jets. The double-sided wr...

Sold Out

$43.99

The WMP Fork Cap Socket is used for the removal and installation of the fork cap nut with a 1-3/8 hex on most Big Twin and Sportster models. Constructed with an O-ring insert design, it allows you ...

WHITES FORK SEAL DRIVER KIT 9pc 35mm through 54mm

$1,217.99

Made with a split design for easy operation when installing fork seals for both conventional and inverted forks. Constructed from hardened and tempered carbon steel and finished with a zinc plating...

$34.99

The ideal tool for setting valves with shim-type adjustment. The WMP Valve Shim Tool compresses the valve shim bucket for easy removal of the valve adjustment shim, allowing you to adjust the valve...

WHITES S/MOTO OFF-ROAD TYRE TOOL (17X3.5- 5 RIM)

$50.99

A great auxiliary tool for tyre irons when replacing off-road tyres and a must when installing tubes. The WMP Tyre Tool provides an easy way to push the tyre bead down into the drop centre of the r...

$14.99

The WMP Cartridge Rod Holding Plate is designed for the disassembly and assembly of KYB/Showa twin-chamber and most street cartridge forks. The tool holds the fork spring back, allowing easier acce...

Sold Out

$33.99

The WMP Tyre Valve Stem Inserter is designed to simplify the installation of tyre valve stems in tubeless tyre rims. Constructed with a notched shank to accommodate various rim sizes and manufactur...

$44.99

Designed to make removing fork caps easier, the WMP Fork Cap Wrench is an essential tool for fork maintenance and fork oil changes. Constructed from durable steel for long-lasting use, the wrench f...

Whites Flywheel Puller 38mm x 1.5 Right-hand. Internal Thread

$155.99

WHITES SHOCK BUSHING DRIVER SET 12.5 14 16 18mm

$52.99

Remove and install shock bushings with ease using the WMP Shock Bushing Driver Set. Including four different-sized bushing drivers from 12.5mm to 18mm, this versatile set suits a range of applicati...

$45.99

The WMP Chain Alignment Tool simplifies alignment of the countershaft and rear sprockets during chain adjustment or wheel installation. The tool clamps to the rear sprocket with the alignment rod p...

$56.99

The WMP Small Multivalve Tool is designed to significantly reduce time when replacing valves in modern 16-20 valve head engines. Compatible with 4-valve-per-cylinder heads that have a 5.5mm valve s...

$145.50 Off

$339.49

~~$484.99~~

The WMP Bearing Puller Set is ideal for workshops and home garages, providing a convenient solution for bearing removal. Constructed from alloy steel for strength and durability, the set includes t...

Sold Out

$15.99

The WMP Tyre and A/C Valve Core Tool is a dual-purpose valve stem core removal and installation tool. It features a large mouth on one end and a small mouth on the other, while the knurled centre p...

$14.99

The WMP OEM replacement cast levers provide an economical alternative to original levers. The perfect spare to have ready in your workshop in case of a race-day disaster. Available in black and OEM...

Sold Out

$55.99

For adjusting valve clearance on twin-cam models Holds valve spring bucket down so adjusting shims can be removed Manufactured from hardened alloy steel Fits the following models: CB750 (ALL) 79-8...

Whites Clutch Removing Tool Honda 35mm x 1.0 R/H Thread (Female/Male)

$63.99

The WMP Clutch Removing Tool is a specialised service tool for removing the clutch where applicable. Constructed from heat-treated carbon steel for strength and durability, it features a durable ho...

Whites Flywheel Puller 27mm x 1.0 Left-hand External Thread

$39.99

Sold Out

Stator + Kokusan Flywheel + MOSFET + Puller (RMS900-103810)

$955.99

Recall-Type Stator + Kokusan Flywheel Rotor + Puller + Regulator + Gasket For Aprilia 2009-2020 RSV4 & 2011-2020 Tuono V4 Repl.# 2D000049 897479 Anyone who rides or repairs Aprilia’s motorcycl...

Stator + Kokusan Flywheel + Puller Kit (RMS900-103880)

$969.99

Recall-Type Stator + Kokusan Flywheel Rotor + Gasket + Puller for Aprilia 2009–2020 RSV4 and 2011–2020 Tuono V4 – Replacement Part No. 2D000049 / 897479Introducing the latest heavy-duty recall-type...

$86.99

Brand new Flywheel Puller. 36 mm x 1.5 right-hand male. All products are tested. All item pictures are accurate; if in doubt, do not hesitate to compare the item to the original part.Removing a Pow...

$24.99

CNC machined aluminium CO2 inflator. The Control Valve head slips directly onto your tyre valve and puts you in complete control over how much CO2 to discharge at a time.